更新數量。
請注意, 由於包裝數量, 我們更新了訂單數量。
請注意, 由於包裝數量, 我們更新了訂單數量為 {0}請注意, 由於包裝數量, 我們更新了訂單數量為 {0}。
SCANNING CONRETE TENDONS, TECH PARK II, PUNE INDIA
How we helped to check the safety of tendons
THE CHALLENGE
Tech Park II is a large IT park, equipped with high-tech support services covering an area of just under 100,000 square meters.
It was completed in 2014. But during the final installations, some tendons were drilled into, where drilling wasn’t permitted.
The architect and developers therefore decided to check the safety of the structure and integrity of the drilled into tendons.
OUR HILTI SOLUTION
Our Hilti PS 1000 X-Scan Detection tool was chosen for the job.
First, the X-Scan was used to detect the exact location of the tendons and to find its location and approximate depth.
This scan data was then compared with the depth of the drilled holes, to see if the tendon was at the same depth and if it were possible that the tendon could have been hit.
The results showed that none of the tendons had been damaged during the drilling and the structure was safe.
This was a great non-destructive way to determine the safety of the structure, saving time and preventing delay for the project.
PRODUCTS USED IN THIS SOLUTION
REQUEST A FREE ONSITE DEMO OF THE PS 1000 X-SCAN SYSTEM
For more information or to request a demonstration of our Hilti scanners and detection systems, contact your local Hilti team. We’ll be happy to help onsite, online or on the phone.
RELATED SOFTWARE
